TX Solar Panels
for Bimini, Sprayhood & Rigging
1 to 4-wing solar panels with textile edge

Simply clip TX solar panel onto textile surfaces with LOXX - done! LOXX elements are made of stainless steel & with sealing washer

TX Marine bimini panels with 2 & 4 wings are foldable - easy storage under deck or in back box

Waterproof plug & coupling, LOXX lower parts, sealing washers & 10m cable are included. TX panels & mounting accessories are salt & sea water resistant

Very high power output, as biminis & sprayhood are shaded less than other deck areas



TX Marine Solar Panels
with LOXX fastener for Bimini, Sprayhood & Winddress

TX Bimini Solar Panels

!! Cookies must be accepted for the function. !!

Solar Panels for 12V System Voltage

Panel type
Picture
Power
Dimensions
L x W
Weight
I sc
Price
incl. 19% VAT
Shop
240 Wp 1164 x 1590 mm 10.9 kg
13.20 A
2100.00 €
180 Wp 929 x 1590 mm 8.2 kg
10.00 A
1865.00 €
120 Wp 1106 x 826 mm 5.1 kg
6.60 A
1400.00 €
90 Wp 873 x 826 mm 4.2 kg
5.00 A
1155.00 €
60 Wp 1106 x 431 mm 2.6 kg
3.30 A
750.00 €
45 Wp 873 x 431 mm 2.2 kg
2.50 A
640.00 €

Solar Panels for 24V System Voltage

Panel type
Picture
Power
Dimensions
L x W
Weight
I sc
Price
incl. 19% VAT
Shop
240 Wp 1164 x 1590 mm 10.9 kg
6.60 A
2160.00 €
180 Wp 929 x 1590 mm 8.2 kg
5.00 A
1950.00 €
120 Wp 1106 x 826 mm 5.1 kg
3.30 A
1435.00 €
90 Wp 873 x 826 mm 4.2 kg
2.50 A
1200.00 €

Description

With LOXX clip onto the Bimini, plug-in - done

Light-weight panels with textile cover made of high-quality tarpaulins. TX modules have been specially developed for mounting on Bimi or Sprayhood. These areas provide sufficient space for powerful solar modules. Finally enough power for the fridge, tablet, sat nav and autopilot.

Quick release fasteners LOXX tops are used in the binding band. The package also includes a watertight plug-in connection (cable plug and socket), LOXX sockets and a 10m connection cable for a particularly simple and fast assembly.

If the panel is no longer needed, it can be quickly removed - Loosen the coupling on the cable, open the LOXX, fold the panel and store it. Thanks to the compact dimensions there is always a place.

Details

The panels consist of one or more wings. In the case of multi-wing panels, these are firmly connected by textile joints. The cable between the panels runs along the joints, tensile forces and kinking loads can not affect the cable at all. The compact dimensions of the panels enables an easy transportation and the folded panel will find space in almost every storage space on board. Even carrying a 200Wp panel - the TX-42052 - in the aircraft is now possible.

Each wing of a multi-wing panel works independently! This special interconnection technology used by SunWare ensures that when one element is shadowed, the other wings continue to produce full power.

With 24V modules, two wings are connected in series and should have the same orientation to the sun.

The monocrystalline PERChigh-performance solar cells are protected in an EVA laminate and ETFE coatings against weathering. Even in diffused light conditions or even in winter, the modules produce a high charging current.

Assembly
The panels are fastened to the Bimini with the LOXX fasteners. Cut holes for the LOXX elements in the Bimini with the enclosed punch, screw the LOXX into the Bimini with the enclosed sealing washers and clip on the panels. To remove the panels, raise the head of the LOXX element and release it from the lower part.

On the module is 1m cable, to this the attached cable plug is mounted. To the 10m long cable, the cable socket and the cap is mounted. Along the Biminipipes, the cable is led to the deck and fixed with the enclosed UV-resistant cable ties. On deck, the cable is routed through a deck passage way to the inside and then to the charge controller. Alternatively, a pluggable waterproof deck bushing can be mounted on deck.

If the panels are removed from the Bimini, the connector on top of the Bimini can be loosened. With the cap, the cable socket is watertight sealed and can remain on the Bimini.

Serial connection of 12V TX panels only permitted if a cell protector is used per module.

FAQ's

I have two Cristec inverter/charger (one of 60A, one of 20A) on my Oceanis 45. what other hardware will I need to connect a TX module of 12A to my system, other than what you supply with the panels? do I simply connect to the Cristec?



On the website of Cristec I can't figure out if the charge has also a special input for a solar panel, I think not. Additionally to the package of TX-panel you need a charge regulator e.g. FOX-360 and a decks passage like: https://en.sunware.solar/produkte/artikel_detail/30104050

Can the modules remain permanently installed?



TX modules are fitted with a high-quality tarpaulin. The substance has similar aging properties as bimini and sprayhood. Should the fabric be attacked after many years, a new textile frame can be sewn to the module at our company.

Mounting Types



The TX panels are clipped onto textile surfaces with LOXX / Tenax quick-release fasteners.

Videos

Torqeedo powered with TX panel

Link: /multimedia/video?id_video=54&tbl_name=modules_video

TX Modules

TX-series-benefits, examples

Link: /multimedia/video?id_video=3&tbl_name=modules_video

SunWare TX-Module

Description of TX solar panels

Link: /multimedia/video?id_video=10&tbl_name=modules_video

Boot Holland 2015 running the fridge

Link: /multimedia/video?id_video=9&tbl_name=modules_video

Solar cells cracks easily

Link: /multimedia/video?id_video=50&tbl_name=modules_video

Electrical connection of TX panels

Link: /multimedia/video?id_video=45&tbl_name=modules_video

Download

Pin-Layout for Binder Connectors

Drawing of the Pin-Layout for Binder Connectors which are used e.g. on TX-panels.
Languages: [en]

File: Pinbelegung_Binder_EN.pdf ()

Datasheet TX-Series

Datasheet for all panels of TX-Series
Languages: [en]

File: DB_Module_TX_12V_24V_2022_US.pdf ()

Inst. manual TX modules

Installation manual TX modules
Languages: [de, en, fr, it, es, nl, se, gr]

File: InModTx2014_all.pdf ()

Dimensions TX-12039

Technical drawing TX-12039
Languages: [all [mm]]

File: TX12039_KD.pdf ()

Dimensions TX-12052

Technical drawing TX-12052
Languages: [all [mm]]

File: TX12052_KD.pdf ()

Dimensions TX-22039

Technical drawing TX-22039
Languages: [all [mm]]

File: TX22039_KD.pdf ()

Dimensions TX-22239 24V

The 12V and 24V version is identical in size.
Languages: [all [mm]]

File: TX22039_KD.pdf ()

Dimensions TX-22039+

Technical drawing TX-22039+
Languages: [en]

File: TX22039_KD+.pdf ()

Dimensions TX-22052

Technical drawing TX-22052
Languages: [all [mm]]

File: TX22052_KD.pdf ()

Dimensions TX-22252 24V

The 12V and 24V version is identical in size.
Languages: [all [mm]]

File: TX22052_KD.pdf ()

Dimensions TX-42039

Technical drawing TX-42039
Languages: [all [mm]]

File: TX42039_KD.pdf ()

Dimensions TX-42239 24V

The 12V and 24V version is identical in size.
Languages: [all [mm]]

File: TX42039_KD.pdf ()

Dimensions TX-42052

Technical drawing TX-42052
Languages: [all [mm]]

File: TX42052_KD.pdf ()

Dimensions TX-42252 24V

The 12V and 24V version is identical in size.
Languages: [all [mm]]

File: TX42052_KD.pdf ()

Product pictures to download


TX + Extension- Panels
with additional socket for extension,
simply insert further TX or TX + solar panels

TX+ Extension-Panels

!! Cookies must be accepted for the function. !!

Solar Panels for 12V System Voltage

Panel type
Picture
Power
Dimensions
L x W
Weight
I sc
Price
incl. 19% VAT
Shop
240 Wp 1164 x 1590 mm 10.9 kg
13.20 A
2150.00 €
180 Wp 929 x 1590 mm 8.2 kg
10.00 A
1890.00 €
120 Wp 1106 x 826 mm 5.1 kg
6.60 A
1430.00 €
90 Wp 873 x 826 mm 4.2 kg
5.00 A
1190.00 €
60 Wp 1106 x 431 mm 2.6 kg
3.30 A
780.00 €
45 Wp 873 x 431 mm 2.2 kg
2.50 A
670.00 €

Description

The extension for existing TX solar systems

The TX + panels are identical to the normal TX modules except for the expansion socket.

If a TX panel is already installed and the system is to be expanded, then the new TX + panel is fixed instead of the previous one and the "old" TX module is plugged into the expansion socket.

The expansion socket is already mounted on the panel. In the panels accessory pack we enclose the matching plug.

ATTENTION: Before plugging in for the first time, check the polarity of the plugs and sockets! The blue negative lead is screwed to the pin with the grounding symbol and the red plus lead is screwed to pin 1.

The cables and the plug-in system are designed for up to 16A. Examples:
one TX 22052 and one TX + 22052 with 6A each
or e.g. TX 12052 and 4 continue TX + 12052
or e.g. TX 12052 with TX + 22052 and TX + 12052.

It is important that the 16 A is not exceeded.

You may be wondering why not all modules are shipped directly with expansion connectors. Each plug and socket is a source of corrosion hazards, especially seawater. It is very important to make sure that the TX + modules always have the waterproof cover or a plug screwed onto the socket.

FAQ's

Why are this panels called "Extension Panels"?



In the case that you already have a TX-panel and you like to extend your system, you would like to use the same cable from the deck to the bimi for both panels.

With the TX+ extension panel you get a panel with an additional connection socket. This means that you replace old TX panel with the new TX+ panel. Than you place the old one to the new location and plug in the old panel into the extension socket of the TX+.

Sounds complicate, but is very simple!

Please r...
...egard the polarity of the pins inside the connectors!


Download

Dimensions TX-12039+

Technical drawing TX-12039+
Languages: [en]

File: TX12039+_KD.pdf ()

Dimensions TX-12052+

Technical drawing TX-12052+
Languages: [en]

File: TX12052+_KD.pdf ()

Dimensions TX-22039+

Technical drawing TX-22039+
Languages: [en]

File: TX22039_KD+.pdf ()

Dimensions TX-22052+

Technical drawing TX-22052+
Languages: [en]

File: TX22052+_KD.pdf ()

Dimensions TX-42039+

Technical drawing TX-42039+
Languages: [en]

File: TX42039+_KD.pdf ()

Dimensions TX-42052+

Technical drawing TX-42052+
Languages: [en]

File: TX42052+_KD.pdf ()

show additional PDFs

Languages: [en]

File: Pinbelegung_Binder_EN.pdf ()

Product pictures to download


TX Sprayhood Solar Panels
Cable exit either left or right

Sprayhood Panels und Sets

!! Cookies must be accepted for the function. !!

Solar Panels for 12V System Voltage

Panel type
Picture
Power
Dimensions
L x W
Weight
I sc
Price
incl. 19% VAT
Shop
120 Wp 804 x 544 mm 5.2 kg
5.70 A
1645.00 €
90 Wp 631 x 544 mm 4.6 kg
4.34 A
1235.00 €
60 Wp 804 x 543 mm 2.6 kg
2.85 A
789.00 €
60 Wp 804 x 543 mm 2.6 kg
2.85 A
789.00 €
45 Wp 631 x 543 mm 2.3 kg
2.17 A
605.00 €
45 Wp 631 x 543 mm 2.3 kg
2.17 A
605.00 €

Description

Spray hood solutions

The sprayhood on board is permanently installed on almost all boats and offers an excellent place for solar panels to cover the electricity requirements. Since the tree almost always shades the middle area of the sprayhood, smaller powerful TX modules on the right or left edge of the sprayhood are suitable. The central area directly below the boom remains free. Such a sprayhood solution supplies enough electricity, for example, to be able to operate the compressor refrigerator permanently.

For the typical 30 to 38 feet yachts from Bavaria Yachtbau GmbH or HanseYachts AG, the sprayhood modules represent the simplest solution for a permanent solar power supply The modules are offered with cable outlets on the left and right (for port/starboard) so that the cables can be led down as elegantly as possible.

On larger yachts, the larger TX modules often fit on the spray hood, so that more charging power is available when consumption is high.

The available space decides which module formats can be used.

The cables will be routed along the poles on the inside. Near to the companionway the pluggable watertight deck passages are mounted for each module and continued in the interior below the ceiling paneling.

Included with each single panel:
- 6 LOXX bases with wrench
- Sealing washers for the LOXX lower parts
- 8mm punch for punching out the holes for the LOXX elements in the sprayhood
- 1m double-sided fleece/velcro tape for attaching cables to the sprayhood rods.

Complete sets for the sprayhood

SunWare offers two complete sets with 90Wp and 120Wp. The sets include all components required for installation. If you don't have a solar charge controller on board yet, we recommend our FOX charge controller.

Included by each sets:
- 2 solar panels with mirrored cable outlets (left and right)
- 2 pluggable decks passages
- 12 LOXX bases with wrench
- Sealing washers for the LOXX lower parts
- 8mm punch for punching out the holes for the LOXX elements in the sprayhood
- 2x 1m double-sided fleece/velcro tape for attaching cables to the sprayhood rods.

Download

Dimensions TX 120164

Technical drawing of panel TX-120164
Languages: [de]

File: TX120164_KD_EN.pdf ()

Dimensions TX-120165

Technical drawing of panel TX-120165
Languages: [de]

File: TX120165_KD_EN.pdf ()

Dimensions TX-120264

Technical drawing of panel TX-120264
Languages: [de]

File: TX120264_KD_EN.pdf ()

Dimensions TX-120265

Technical drawing of panel TX-120265
Languages: [de]

File: TX120265_KD_EN.pdf ()

Product pictures to download


TX Solar Panel for Rigging & Mobile
Battery Winter Charger & Mobile Applications

Special Solar Panels TX-Series

!! Cookies must be accepted for the function. !!

Solar Panels for 12V System Voltage

Panel type
Picture
Power
Dimensions
L x W
Weight
I sc
Price
incl. 19% VAT
Shop
20 Wp 668 x 333 mm 1.0 kg
1.10 A
352.00 €
20 Wp 750 x 275 mm 1.0 kg
1.10 A
400.00 €

Description

Panels for special tasks

The solar panel TX-11027 is ideal for mobile use. All around is a 2cm wide attachment edge of cover fabric sewn for free use. This edge can be used in a variety of ways for attachment, e.g. by using LOXX, eyelets or sew on velcro or webbing. The panel and cable outlet is 100% waterproof and resistant to salt water.

The solar panel TX-14152 is ideal for charging the battery in winter storage. With the mast upright, simply top D-eyes on two traps, e.g. from jib or mainsail. Align to the south. The lower two D-eyelets e.g. attach to railing, bow or stern with rope. Put tension on the traps - ready!

The panel now floats a few meters above deck, free of shadowing, steeply aligned - ideal for the winter sun. So steep that leaves and dirt slip off the module or are rinsed off the next rain. The panel and cable outlet is 100% waterproof and resistant to salt water.

TX-14152 - Details

The FOX-062 charge controller is included in the package of the panel TX-14152!

The ideal battery charger if the boat is not used for a long time and the batteries need to be maintained. E.g. in the winter periode. The cable has a lenght of 10m, long enough to come into the cabin. Plug in the enclosed charge controller FOX-062, this in turn just plug into a 12V board socket - done!
During the winter, the battery is charged and maintained by the solar system. Due to the significantly longer life of your batteries, the solar system will pay for itself quickly.

The TX-14152 is sufficient for a battery capacity of up to 400Ah (12V).

The D-eyes are sewn to the strap - breaking load 500kg. The panel is sewn only at the upper edge with the webbing. At the lower edge, the webbing is only guided, the forces of tension and elongation of the webbing are not introduced into the panel (analogous to the fixed / floating bearing in mechanical engineering). The connection cable on the panel is also secured by an additional strain relief.

In order to avoid strong swinging in the wind, the panel can be additionally tensioned laterally.

TX-11027 - Details

3m supply cable with open cable end is mounted on the module. So the module can be combined with any solar charge controller.

Videos

Boot 2015, Presentation Winter-Battery Charger

Link: /multimedia/video?id_video=6&tbl_name=modules_video

Download

Dimensions TX-11027

Languages: [[all]]

File: TX11027_KD.pdf ()

Product pictures to download